One Coat Roofix 20/10 Black, Grey or Sun Reflecting White.
Specifically developed to provide instant waterproofing for leaking roofs, an all-weather product that can be applied even in damp conditions. Roofix 20/10 can be used to repair specific areas that are leaking or totally waterproof an entire roof. This product is multi-purpose and can be utilised on a wide variety of problem areas.
A single pack elastomeric acrylic based (non bitumastic) compound, with built in Draylon fibre reinforcement, providing excellent flexibility and durability. Provides exceptional adhesion to virtually any roofing material. Roofix 20/10 does not require special primers, and can provide long term protection in excess of 10 years. Manufactured in the UK
20/10 is:
Area of use
Exterior: roof areas gutters lead flashing slates asbestos cement metal asphalt old roofing felt bay window and porch areas
Substrates: A wide variety of roofing materials
Colour: As listed
Finish: Semi Gloss
Volume solids: 48%
Theoretical spreading rate: 1 sq. metre per litre
Flash point: 42°C
Specific gravity: 1.1kg litre
Dry to touch: 16 hours
Overcoating time: 2 - 3 days
Instructions
As with the Liquid Rubber, applying is as easy as painting it on.
FAQ
What tools are involved?
Do I need to replace any timberwork?
Do I need to strip any old felt off?
Does the roof need to be dry before installation?
What should I do if I get stuck during installation?
How do I make an order and how do I pay?
Q. Do I need any special tools to install the system?
A. No! You only need the usual DIY tools such as saw/screwdriver and hammer etc. There are no specialist tool required.
Q. Do I need to replace any timberwork?
A. No! Unless it's rotten or water damaged.
Q. Do I need to strip the felt off my roof before I start?
A. Only if your roof decking is soft or rotten as the system uses a geotextile breather underlay, which also has excellent thermal insulating qualities.
Q. Does the roof need to be perfectly dry before installation?
A. Your roof will never be perfectly dry as all flat roofs have a certain amount of water retention although the drier the better even though the rubber membrane breathes due to it being vapour permeable allowing you to install the roof with minimal fuss on a damp surface..
Q. What if I get stuck during installation?
A. No problem! Just give us a ring and we will talk you through the job step by step in simple terms We can also advise you how to install it as well as any other problems you may have. This advice is only at the cost of a phone call, there is no extra charge to you.
Q. How do I Order and how will I pay?
A. You can phone on 01793 435502 where you can order as well as get awnsers to any questions you might have.